Advertisement
Table of Contents
Neva Change Table
Assembly Instructions
Thank you for your purchase.
Please follow the instructions below for correct assembly.
A
B
bolt
locking nuts
x24
x24
Hardware Supplied
D
E
1x
1x
screw
wall screw
washer
Wall Strap
Phillips & Flathead screwdrivers required.
For quicker assembly, we recommend the
use of a power drill on a low-speed setting.
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore BC, QLD, 4558
C
dowel
x36
F
G
H
2x
1x
1x
wall anchor
wall strap
1
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Mocka Neva Change Table
Summary of Contents for Mocka Neva Change Table
- Page 1 Wall Strap Phillips & Flathead screwdrivers required. For quicker assembly, we recommend the use of a power drill on a low-speed setting. mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore BC, QLD, 4558...
- Page 2 Insert 18 x dowels (C) to panel [5]. Attach 12 x bolts (A) to panel [5]. Attach panels [5], [2] and [3] and [4] together as shown and secure Tighten with a screwdriver. with 24 x locking nuts (B). Tighten with a screwdriver. mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore BC, QLD, 4558...
- Page 3 Use a drill to create a small hole lining up with the safety strap (H). Fasten to wall using 1x wall anchor (G), 1x washer (F) and 1x wall screw (E). Ensure unit is balanced and steady before use. You’re done, enjoy! mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore BC, QLD, 4558...
Need help?
Do you have a question about the Neva Change Table and is the answer not in the manual?
Questions and answers