Setting The Footswitch Functions (Ctl 1 Function, Ctl 2 Function) - Boss Space Echo RE-202 Reference Manual

Setting the Footswitch Functions (CTL 1 FUNCTION, CTL 2 FUNCTION)

Here's how to configure the functions of the footswitch connected to the CTL 1, 2/EXP jack (FS-5U, FS-6, FS-7; sold separately).
1. Press and hold down the [TAP] switch, and turn on the power.
2. Set the [MODE SELECTOR] knob to "6" if you wish to set the CTL 1 function, or to "7" if you wish to set
the CTL 2 function.
3. Use the [MEMORY] button to select the function to set.
MEMORY indicators
MANUAL Select the next memory.
1 Select the previous memory.
2 Turn on/off effects.
3 Press the footswitch at the tempo of the song you're playing to specify a matching repeat rate.
CTL 1: WARP is on while the switch is pressed.
4
CTL 2: TWIST is on while the switch is pressed.
4. Press the [TAP] switch to exit the function settings.
Function
Various Settings
11