Assembly Horizontal - kruss MSL4000 Series Operating Manual

4. Assembly horizontal

• The magnification is changed by rotating the lens
housing by 180°. The respective magnification is then
displayed. The image should first be focused with
a low magnification and you should then switch to a
higher magnification.
• Insert the pillar into the block horizontally.
Fasten by using the screw on the side.
• Insert the cell stage vertically into the rear hole of the
block . Fasten by using the screw.
• Attach the polarization device to the cell stage.
KSW4000 Series | 4. Assembly horizontal
35