Step 3; Step 4 - modway EEI-3147 Assembly

EEI-3147 DINING TABLE

STEP 3:

1. Repeat STEP 1 to assemble the other 1 piece of Leg (1) to Top Panel (3) as shown.
2. Attach 2 piece of Big Nuts (G) and 2 piece of Big Flat Washers (D) to the two ends of Bottom
Support (5) as shown.
3. Use Adjustable Spanner (H) to tighten Big Nuts (G) as shown. Don't tight Big Nuts (G) fully.

STEP 4:

1. Please insert 2 pieces of Upper Rails (4) into the pre-drilled holes on Legs (1) by the convex slot as shown
by two adults.
2. When Legs (1), Top Panel (3), Upper Rails (4) and Bottom Support (5) are fixed, please fully tighten all
Big Nut (G) and Bolt (A).
Customer Service 609-256-9000︱www.modway.com
Page 3 of 5