Switching The Boiler On And Off (Chimney Sweeping Function) - Herz firestar de Luxe 18 Operating Instructions Manual

9 Boiler control
9.7

Switching the boiler on and off (chimney sweeping function)

SWITCH-ON
Navigation:
Screen:
By pressing the button:
the boiler will be switched on.
the boiler will switch off, remains
off and the previous page will be
displayed.
Note:
The system can only be switched on if there are no
errors that prevent it from starting.
CHIMNEY SWEEPING FUNCTION
Navigation:
Screen:
24
SWITCH-OFF
Navigation:
Screen:
By pressing the button:
the boiler will be switched off.
the boiler remains on and the
previous page will be displayed.
Note:
The boiler will switch to the operating condition "burn
out phase" (except "cold start" or "ready"). When
switching off during cold start, the cold start is ended
and then changes to the burnout phase. This
prevents impermissibly high amount of fuel in the
combustion chamber.
If "chimney sweeping function" is
active, the remaining time can be
raised in 5 minutes steps by
pushing the
Raises
(chimney sweeping mode) by
5 minutes steps.
After pressing the chimney sweeping symbol, the
boiler can also be switched off.
-button.
the remaining time