Table of Contents
Advertisement
2
WARNING NOTES
Risk of injury and damage to
property
handling of the system. Damage
to property is possible.
Caution – hot surface
Warning – against hand injuries.
No
authorisation.
However,
adherence
transportation,
installation,
maintenance notices as well as technical data (in
the operating instructions, product documentation
and on the equipment itself) which are not
specifically highlighted, is also vital to avoid
breakdowns which may directly or indirectly cause
major personal or material damage.
General safety notes
For reasons of clarity and possible permutations,
this documentation does not contain all detailed
information and cannot take account of every
conceivable operating or maintenance scenario.
Should
you
require
encounter specific problems, which are not
handled in detail in the documentation supplied,
you can obtain the required information from your
specialist dealer or direct from HERZ.
People (including children) who, because of their
physical, sensory or mental capabilities
because of their lack of experience or knowledge,
are unable to use the equipment safely must not
use this equipment unless they are supervised or
instructed by a responsible person.
Basic safety information
Due to its functionally limited electrical and
mechanical characteristics with regard to usage,
operation and maintenance, if the equipment is
not able to work according to its appropriate use
or improper interference occurs, it may cause
serious health and material damage. It is therefore
conditional that the planning and implementation
of all installations, transportation, operation and
maintenance will be carried out and supervised by
responsible, qualified persons.
due
to
improper
admittance
without
to
guidelines
for
operation
and
further
information
or
or
When operating electrical systems, certain parts
of those systems will always carry a hazardous
electrical voltage or be exposed to a mechanical
load. Only appropriately qualified personnel may
carry out work on the system. They must be
thoroughly familiar with the content of this and all
other manuals. In order for this system to function
safely and without any problems, transportation,
storage, operation and maintenance must be
carried out properly and carefully. Instructions and
information on the systems must also be heeded.
2.1
Installation
General safety notes
In order to ensure that the system will function
properly,
the
relevant
manufacturer's installation instructions are to be
heeded during the installation of the system!
Documents from the manufacturer relating to the
heating devices and components used are
available from HERZ on request.
2.2
Operation and maintenance
2.2.1
General safety notes
In order for the system to be
operated and maintained safely, it
must be operated and maintained
properly by qualified personnel
while heeding the warnings in this
documentation
instructions on the systems.
In
unfavourable
conditions, the temperatures of
parts of the housing may exceed
80 °C.
Ambient conditions
Operating temperature:
Warehouse-/ transport
temperature:
Humidity:
operation
storage
Warning notes
2
standards
and
the
and
the
operating
+10 to +40 °C
-20 to +70 °C
5 to 85 %
5 to 95 %
5
Advertisement
Table of Contents
