Table of Contents
Advertisement
9
Boiler control
9.14.1
Network configuration
Navigation 1:
Screen:
By pressing the button:
NetBIOS Name
the NetBIOS name can be set up
The boiler IP address can be set
IP-Address
up
Subnetmaske
the subnet mask can be set up
Gateway-
the gateway address can be set
Address
up
the settings can be saved
the submenu for the DNS settings
will be displayed
The network connection can be
tested
Network connection ok:
Connection
Internet
test
controller is ok
DNS fault:
no or incorrect DNS address
stored
no internet connection:
When activated, the IP-address
DHCP
assigned
active
controller is connected to the
router) If you don't know the
network settings, it makes sense
to activate DHCP
to return to the settings overview.
To connect a T-Control via WLAN to a network, a WLAN repeater with a LAN port is required. It is also
possible to use a router with repeater mode.
56
connection
of
check LAN-cable
automatically (if
Navigation 2:
Screen:
By pressing the button:
DNS 1 / DNS 2
Note:
DNS means Domain Name System which unpacks a
domain into the corresponding IP address. That
means, by setting up the DNS server, the T
the
CONTROL is able to send E-mails.
We recommend the following configuration:
DNS 1: 8.8.8.8 (= DNS Server of Google, it is public
and free. That can be an alternative to the internet
provider's server)
DNS 2: DNS – Server of the internet provider
the
the IP address of the DNS server
can be set up
the network configuration page
will be displayed again
Advertisement
Table of Contents
