Table of Contents
Advertisement
9.3.1
Operation and handling
The touch panel is a touch-sensitive screen and control unit. By touching the screen, you can change
released values or move to other pages. The screen navigation and input can be done with finger, pen,
pencil, etc.
9.4
Main menu
After start up, this picture will appear. In the centre of the screen important values according the boiler,
buffer, hot water tank, heating circuit and so on are shown. The shown values can be adapted individually.
NOTE: The values shown in the individual screenshots are not default values!
If the following symbol is pressed:
the main menu will be displayed. (Home Button)
you come back one level (return button)
fault messages (warnings & alarms) will be displayed
(see chapter 10)
the individual modules (boiler, hot water tank, buffer, heating circuit,
solar, hydraulic compensator, net pump, zone valve, external demand)
will be displayed.
(see chapter 10)
the menu settings (network configuration, E-Mail, screen saver) will be
displayed
(see chapter 9.10)
the date & time can be set up
(see chapter 9.13)
the code input screen will be shown
(see chapter 9.7)
the boiler gets switched On / Off. (see chapter 9.6)
can be switched between the pages of the value overview on the start
screen.
you get to the display of the current weather data.
Boiler control
9
21
Advertisement
Table of Contents
