Module Configuration; Terms And Definitions - Herz firestar de Luxe 18 Operating Instructions Manual

9 Boiler control
9.12

Module configuration

Boiler
Overview
Status
Settings
Inputs/Outputs
Operating hours
Heating circuit
Overview
Status
Operation modes
Settings
Agg-Test
Heating circuit curve
Time program / Barrier times
Hydraulic compensator
Overview
Status
Agg-Test
Barrier times
Ext. requirement
Overview
Status
Settings
Barrier times
Heat curve
9.13

Terms and definitions

In this chapter all parameters and terms of the different modules are explained.
Some terms can be a display value and a setting value. To recognize these, they are
marked with a *.
◼
◼
30
Buffer
Overview
Status
Settings
Agg-Test
Barrier times
Time mode
Overview
Time program
Settings
Net pump
Overview
Status
Agg-Test
Barrier times
Additional boiler
Overview
Status
Settings
Agg-Test
Barrier times
The term is a display value if aggregate test is inactive → the symbol of the
aggregate test is:
If the aggregate test is active (by pressing the symbol
green and the aggregate test gets activated) the individual components can be tested
by pressing the control lamp. Now the term is a so-called setting value.
Hot water tank
Overview
Status
Settings
Agg-Test
Circulation pump
Time program/Barrier times
Solar
Overview
Status
Settings
Agg-Test
Yield
Zone valve
Overview
Status
Agg-Test
Barrier times
the hand will change to