Table of Contents
Advertisement
IMPORTANT NOTE
Thank you for choosing our Ecler AUDEOSB110P self-powered sub-woofer cabinet!
VERY IMPORTANT
It is
contents before any connection in order to maximize your use and get the best
performance from this equipment.
To ensure optimal operation of this device, we strongly recommend that its maintenance
be carried out by our authorised Technical Services.
Ecler AUDEOSB110P comes with a 3-year warranty.
INTRODUCTION
The AUDEO Series acoustic cabinets is the result of a profound analysis of present and
future needs for playing music and announcements. Some of the most evident and direct
applications for the AUDEO cabinet are shops, department stores, schools, conference
rooms, hotels, industries, offices, museums, halls, hospitals, leisure areas, etc.
In some of these applications, you must also have an element to reinforce the lower end
of the audible spectrum, i.e., the lower frequencies or sub-bass. The AUDEO SB110P
self-powered subwoofer is ideal for these cases.
CONNECTION AND START UP
The AUDEO SB110P has two unbalanced RCA audio inputs, labelled INPUT L and
INPUT R. You can send them a mono or stereo line-level signal: the SB110P internally
works on mono signals and, therefore, adds L and R input signals to obtain a valid signal
to work on. You can link a second AUDEO SB110P unit or other auxiliary equipment using
L and R STACK outputs, also on RCA connectors. L and R STACK output signal is a copy
of the original L and R INPUT signal.
The unit's AC power supply uses the supplied IEC lead, and the unit is turned on/off by
the ON/OFF switch. The "ON" LED is located on the left of the input jacks; it lights up in
green when the unit is on and in orange after entering low consumption (standby) mode,
and this automatically happens after detecting no input signal for a few minutes. The unit
also automatically returns to "ON" mode (green LED) when it re-detects an input signal.
to carefully read this manual and to fully understand its
5
Advertisement
Table of Contents
