Sony HDV HVR-1500 Operating Instructions Manual page 93

S Y S T E M M E N U
S E T U P M E N U
A U T O F U N C T I O N
H O U R S M E T E R
Monitor screen
3
Press the ,/B button.
The cumulative counts by the digital hours meter are
indicated on the monitor screen and in the time counter
display.
Digital hours meter indications on the monitor
screen
All four counts (T1, T2, T3, and CT) are indicated on the
monitor screen.
Resettable trip counts
Unresettable counts
H O U R S M E T E R
T 1 0 0 0 0 0 X 1 0 H O U R S
T 2 0 0 0 0 / 0 0 0 0 0 X 1 0 H O U R S
T 3 0 0 0 0 / 0 0 0 0 0 X 1 0 H O U R S
C T 0 0 0 0 / 0 0 0 0 0 X 1 0 C O U N T
T 1 : O P E R A T I O N
T 2 : D R U M R O T A T I O N
T 3 : T A P E R U N N I N G
C T : T H R E A D I N G
The four-digit value to the left of the slash (/) is the
resettable trip count, and the right value is the cumulative
total from manufacture.
Digital hours meter indications in the time
counter display
One of the four indications appears in the time counter
display at a time. Use the M and m buttons to change the
item displayed.
Initially, only the trip value appears. Hold down the ,/B
button to display also the cumulative total from
manufacture, which will appear to the right of the trip
value and the slash (/).
The following illustrates the digital hours meter
indications in the time counter display in all four display
modes. The right-hand indication for each display mode is
the indication you can view while holding down the
,/B button in the menu control section.
T1 (OPERATION) mode:
Oper. 00000
T2 (DRUM ROTATION) mode:
Hours meter
Time counter display
T3 (TAPE RUNNING) mode:
CT (THREADING) mode:
To end the digital hours meter display
Press the MENU button.
To reset the trip values
About this operation, consult your Sony dealer.
Drum 0000
Tape 0000
Thread 0000
0000/00000
0000/00000
0000/00000
93
Periodical Maintenance