DSC LCD55O1Z Installation Instructions Manual page 36

FCC COMPLIANCE STATEMENT
CAUTION: Changes or modifications not expressly ap-
proved by Digital Security Controls Ltd. could void your au-
thority to use this equipment.
This equipment generates and uses radio frequency energy
and if not installed and used properly, in strict accordance
with the manufacturer's instructions, may cause interference
to radio and television reception. It has been type tested and
found to comply with the limits for Class B device in accord-
ance with the specifications in Subpart "B" of Part 15 of FCC
Rules, which are designed to provide reasonable protection
against such interference in any residential installation. How-
ever, there is no guarantee that interference will not occur in
a particular installation. If this equipment does cause interfer-
ence to television or radio reception, which can be deter-
mined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more
of the following measures:
©2002 Digital Security Controls Ltd.
Toronto, Canada • www.dsc.com
Printed in Canada 29006002 R001
firealarmresources.com
• Re-orient the receiving antenna
• Relocate the alarm control with respect to the receiver
• Move the alarm control away from the receiver
• Connect the alarm control into a different outlet so that
alarm control and receiver are on different circuits.
If necessary, the user should consult the dealer or an experi-
enced radio/television technician for additional suggestions.
The user may find the following booklet prepared by the FCC
helpful: "How to Identify and Resolve Radio/Television In-
terference Problems". This booklet is available from the U.S.
Government Printing Office, Washington, D.C. 20402, Stock
# 004-000-00345-4.
This Class B digital apparatus meets all requirements of the
Canadian interference-causing equipment regulations.
Direct all comments concerning this
publication to pubs@dscltd.com