Ch 4. Using Web Viewer; Using Web Viewer; Login - Samsung SNP-3350 User Manual

Chapter 3. Installing Camera & Network Setup
Port Setup
②
Category
Select a service port;
Port Setup
the default is 80.
Notes
When a device is connected to a cable or xDSL modem, its IP address
keeps changing each time it attempts to connect to the ISP (Internet
Service Provider) so you cannot check the new IP address of the device.
DDNS is useful for situations like this, involving products with dynamic IPs.
You can easily check the new IP address of your products by registering
them to our DDNS server at www.samsungipolis.com. To use the DDNS
service, first register the product to the DDNS server. Come back to this
page, select Enable under the Use DDNS option, and then enter the ID and
password that was submitted to the DDNS server. For more information,
please refer to Page 50: "Using DDNS."
34
NETWORK PTZ CAMERA User Guide
80
Description
Chapter 4. Using Web Viewer

4.1. Using Web Viewer

4.1.1. Login

Enter the IP address of your camera in an internet browser, and then press Enter to connect
to the Web Viewer login page.
Enter your user ID and password, and then click <Login> to move to the next page.
Notes
The default administrator login information is ID: admin, and PW: 11111111.
The <Guest> button can be used for access only if the Guess Access option is checked in
System → User → Guest Setup.
Please change the password of your administrator account upon the first login.
Notes
It helps you prevent unauthorized users from connecting to the administrator page.
NETWORK PTZ CAMERA
35
User Guide