Samsung SNP-3350 User Manual page 23

Chapter 4. Using Web Viewer
■Streaming Engine
Configure the RTP/RTSP streaming service.
Category
RTSP/TCP Check to use RTSP/TCP.
Services RTP/UDP Check to use RTP/UDP.
RTP/Multicast Check to use RTP/Multicast.
RTP/Multicast IP Enter an IP address for RTP Multicast.
RTP/Multicast Port Enter a port number for RTP Multicast.
Unicast Image Resolution Select a resolution for the RTSP/TCP and RTSP/UDP streaming services.
RTSP Standard Port(554) Check to use the RTSP standard port, 554.
• Multicast RTP is effective to transfer video to multiple users as it uses a very low amount
of network bandwidth.
• Multicast RTP, however, uses UDP that transfers the latest video but may also incur the risk
of data loss.
• Multicast requires an authorization from the server router; multicast over the internet is not
available.
• Streaming resolution for Multicast is fixed as CIF.
Notes
Unicasting is suitable for VOD (Video on Demand) services as it does not
transfer video data unless a user connects and requests data transfer.
Caution
• New settings are saved only if you click the
The button cancels new settings.
44
NETWORK PTZ CAMERA User Guide
Description
button at the bottom of the screen.
■ How to Use Streaming Engine
Please follow the instructions below to use the streaming engine.
We recommend using VLC Media Player for the streaming engine. (Version: 1.0.1 or higher)
❍ Step 1) Set Up Streaming Page
Select a desired function on the streaming engine, and then press <Apply>.
❍ Step 2) Run VLC Media Player
The following window appears when you open VLC media player in your computer.
• Enter the camera ID and PW into the menu highlighted in the picture below.
NETWORK PTZ CAMERA
45
User Guide