Swing - Samsung SNP-3350 User Manual

Chapter 4. Using Web Viewer
■Preset Setup
To save a desired location for the Pan/Tilt or Zoom/Focus operation along with detailed
camera settings for the location, configure the following options.
Category
Number Select a number to identify a preset. (Preset numbers 1 to 255 are available.)
Name Name a preset.
Move Moves to a selected preset when its number is selected.
Edit Enables detailed camera settings to be configured for a preset.
Saves a preset; move to a desired location for the Pan/Tilt or Zoom/Focus operation,
Add enter a preset number and name, and then press the Add button to save the location
as a preset.
Delete Deletes an existing preset; select a preset number, and then press the Delete button.
Caution
• N ew settings are saved only if you click the
To configure detailed camera settings for a preset, select a preset number, and then move the
camera to the preset before pressing the
■Sequence Setup
You can configure detailed sequence settings for each camera mode. Available camera
modes are Swing, Group, Tour, Trace, and Auto Run, and they are described in the chart
below.
Category
Commands the camera to move between 2 selected presets, monitoring the

Swing

route.
Recalls groups of multiple preset locations consecutively. A group can contain up
Group
to 255 presets.
Recalls groups of presets consecutively in an orderly manner. Up to 6 groups can
Tour
be listed for this function.
Trace saves and reactivates patterns of custom camera movements. Up to 4
movement patterns can be memorized.
Trace & Auto Run
Auto Run commands the camera to automatically perform a preset sequence
action if no command has been entered via the controller for a while.
62
NETWORK PTZ CAMERA User Guide
Description
button on the right of the screen.
button.
Description
4.2.2.1. Swing
■Swing Setup
Category
Mode 3 modes are available: Pan Swing, Tilt Swing, and P&T Swing.
Sequence Pan Swing Activates only the Pan operation for Swing monitoring.
Setup Tilt Swing Activates only the Tilt operation for Swing monitoring.
P&T Swing Activates both the Pan and Tilt operations for Swing monitoring.
First Preset Select the first preset for a route consisting of 2 presets.
Second Preset Select the second preset for a route consisting of 2 presets.
Select the camera's movement speed between the first and second presets.
Speed
(Levels 1 to 64 are available.)
Select the number of seconds to keep the PTZ camera on a preset location for
DWT(Dwell Time)
monitoring.
Caution
• New settings are saved only if you click the
The button operates the camera with the selected settings.
NETWORK PTZ CAMERA
Description
button at the bottom of the screen.
63
User Guide