Assembling The Unit - Stihl BR 450 Instruction Manual

3 Assembling the Unit

3 Assembling the Unit
3.1 Mounting the Hose Clamps and
Pleated Hose
1
3
► Push the hose clamp (1) (with retainer for
throttle cable) onto the elbow (3) – the posi‐
tioning marks must face to the left.
► Push the pleated hose (2) over the elbow (3).
3
4
► Push the hose clamp (1) onto the pleated
hose (2).
► Line up the positioning marks on the hose
clamp (1) and elbow (3) – the screw lug faces
down.
► Secure the hose clamp (1) with the screw (4).
2
► Push the hose clamp (5) (without retainer for
throttle cable) onto the blower tube (6) – the
positioning marks must face to the right.
► Push the blower tube (6) into the pleated
hose (2).
0458-391-8321-B
2
1
2
5
6
2
7
► Push the hose clamp (5) onto the pleated
hose (2).
► Line up the hose clamp (5) and blower
tube (6) – as shown.
► Secure the hose clamp (5) with the screw (7).
3.2 Mounting the Control Handle
3
2
► Push the control handle (1) onto the
mount (2) .
► Insert and tighten down the screws (3) firmly.
4
► Engage the throttle cable (4) with sleeve (5) in
the hose clamp (6).
English
5
6
1
6
5
7