enphase IQ8 Installation And Operation Manual page 29

• If device scanning on the IQ Gateway is inhibited, the app displays Scan Inhibited. If you
b. Method 2: Use an IQ Gateway
• Press the Device Scan button on the IQ Gateway. The IQ Gateway begins a 15-minute scan
Log in to Enphase Installer platform to use Enphase installer platform's Array Builder to add the newly detected
K.
microinverter to the virtual array.
L. Ship the old microinverter to Enphase using the supplied return-shipping label.
29
IQ8 / IQ8+ / IQ8M / IQ8A / IQ8H Micro Installation and Operation
need to add more microinverters to the system when device scanning is inhibited on the IQ
Gateway, you must use the Enphase Installer App scanning tool to provision them on the IQ
Gateway, rather than using the IQ Gateway's device scanning function to discover them. If
this is not possible and you need to enable device scanning on the IQ Gateway, contact
Enphase Customer Support at
to identify all of the microinverters deployed at the site. The Microinverter Communications
LED flashes green during the scan.
© 2022 Enphase Energy Inc. All rights reserved.
enphase.com/en-us/support/contact.
Microinverter Communications LED
Device Scan button
Mar 2022