Back-Light - Teac RC-L800 Owner's Manual

Back-light

You can change amount of the time the screen
remains back-light after use and the sensitivity of
the light sensor determining when the back-
lighting should be turned on/off.
1. Enter the setup mode.
2. Press 5 or b to select OTHER and press
ENTER.
3. Press 5 or b to select BACKLIT and press
ENTER.
30
Other Settings 3
4. Select the amount of time the screen
remains back-lit after use by pressing 5 or
b. The amount of time ranges from 1–60
seconds in 1-second increments, then press
ENTER.
5. Select the sensitivity of the light sensor by
pressing 5 or b, Sensitivity ranges from
1–16. Press ENTER.
6. Press the
return to the previously displayed screen
layout.
button repeatedly to exit and