Timer/Macro Mode; Setting Timer/Macro Mode - Teac RC-L800 Owner's Manual

Timer/Macro Mode transmits a Macro command
at a specific time delay within 23 hours and 50
minutes. The time delay can be set in 10-minute
increments.

Setting Timer/Macro Mode

1. Press and hold the SLEEP button for 3
seconds to enter the setting mode.
2. Press 5 or b to select the time delay in 10-
minute increments.
24

Timer/Macro Mode

3. Press ENTER.
Start to define the Macro:
Example:
TV-Power on w TV-TV/Video w DVD-Power on
(5-second interval) w DVD-Play
4. Press the
5. Press the
The screen returns to normal mode and indicates
the delay time and the device information.
Note:
< If you press the
< If at any point during setup you wish to exit from
Press the device button of TV.
Press the TV power button.
Press the TV TV/VIDEO key.
Press the device button of DVD.
Press the DVD power button.
Press the button to select the interval.
Press [5] for 5-second interval.
Press the DVD play button.
button to confirm.
button to save and complete
the setting.
Macro, the timer mode is set but with no Macro
executed.
the setup screens, press the
back through the displayed screens one by one.
button without defining a
button to go