Deleting Macro-Assigned Key - Teac RC-L800 Owner's Manual

Deleting Macro-Assigned Key

1. Enter the setup mode.
2. Press 5 or b to select MACRO and press
ENTER.
3. Press 5 or b to select DELETE and press
ENTER.
Macro Function 4
4. By pressing the device and page buttons,
select the device and then the page that
contains the Macro key.
Only keys that have been assigned a Macro are
displayed on the screen.
5. Press the key to which a Macro has been
assigned to delete the key.
6. Press the
return to the previously displayed screen
layout.
Note:
If at any point during setup you wish to exit from
the setup screens, press the
through the displayed screens one by one.
button repeatedly to exit and
button to go back
19