Viewing Macros - Teac RC-L800 Owner's Manual

Viewing Macros

1. Enter the setup mode.
2. Press 5 or b to select MACRO and press
ENTER.
3. Press 5 or b to select VIEW and press
ENTER.
18
Macro Function 3
4. By pressing the device and page buttons,
select the device and then the page that
contains the Macro key.
The screen shows the Macro key if exists on
the page.
5. Press the key to which a Macro has been
assigned. The Macro's steps flash on the
screen in order.
6. Press the
return to the previously displayed screen
layout.
Note:
If at any point during setup you wish to exit from
the setup screens, press the
through the displayed screens one by one.
button repeatedly to exit and
button to go back