Deleting Key Code 1; Deleting An Individual Key Code - Teac RC-L800 Owner's Manual

Deleting an Individual Key Code

The code assigned to a key or a MACRO can be
deleted from keys individually.
1. Enter the setup mode.
2. Press 5 or b to select CODE and press
ENTER.
3. Press 5 or b to select DEL KEY and press
ENTER.
4. Press 5 or b to select DEL KEY again and
press ENTER.

Deleting Key Code 1

5. By pressing the device and page buttons,
select the screen page from which you wish
to delete a key.
6. Touch the key you wish to delete the key
code or MACRO.
< When deleted,
previously was blank,
< You may continue to delete other keys.
7. Press the
return to the previously displayed screen
layout.
Note:
If at any point during setup you wish to exit from
the setup screens, press the
through the displayed screens one by one.
flashes briefly. If a key
flashes briefly.
button repeatedly to exit and
button to go back
13