TMC Reef Pump Compact 500 Instructions Manual page 7

1. Install the feet in the holes on the underside of the pump body and attach a hosetail as required.
2. Install and secure the Reef Pump Compact controller in a suitable location where it can be easily accessed and adjusted e.g. on the side or back
of your aquarium cabinet, but ensuring it is NOT mounted above the aquarium or sump, or in any position where it may accidentally fall into
water or be splashed by water.
3. Install the pump in your desired location e.g. sump, ensuring that it is fully submerged and secured.
4. Connect the pump to the controller and the controller to PSU and plug into the mains socket. Switch the power on.
Reef Pump Compact
500 and 1500
7
PUMP
CONTROLLER
INSTALLATION
Reef Pump Compact
2500, 5000 and 10000
PSU
CONTROLLER
PUMP
PSU