Iso; Metering; Language; Date/Time - Minolta MN40WP User Manual

2. Select 'Light Exposure' using the LEFT or RIGHT buttons.
3. Press the UP or DOWN buttons to navigate the menu, and press the OK
button to confirm your selected option (+3, +2, +1, 0, -1, -2, -3).
4. Press the MODE button to exit the settings menu.

3.1.11 ISO

This function adjusts the light sensitivity in your photograph.
1. In Photo Mode press the SETTINGS button.
2. Select 'ISO' using the LEFT or RIGHT buttons.
3. Press the UP or DOWN buttons to navigate the menu, and press the OK
button to confirm your selected option (ISO Auto, ISO 100, ISO 200, ISO
400).
4. Press the MODE button to exit the settings menu.

3.1.12 Metering

Metering mode refers to the way in which a camera determines the appropriate
exposure (quantity of light reaching the camera lens). Spot metering will only
base the exposure setting on a very small area of the scene. Center metering
will use the light from the center of the LCD and the Multi setting measures the
light at several points on the screen.
1. In Photo Mode press the SETTINGS button.
2. Select 'Metering' using the LEFT or RIGHT buttons.
3. Press the UP or DOWN buttons to navigate the menu, and press the OK
button to confirm your selected option (Center, Multi, Spot).
4. Press the MODE button to exit the settings menu.

3.1.13 Language

This function allows you to set the camera's interface language.
1. In Photo Mode press the SETTINGS button.
2. Select 'Language' using the LEFT or RIGHT buttons.
3. Press the UP or DOWN buttons to navigate the menu, and press the OK
button to confirm your selected language.
4. Press the MODE button to exit the settings menu.

3.1.14 Date/Time

This function allows you to set the current Date and Time on your recorded
video clips and captured photos.
1. In Photo Mode press the SETTINGS button.
2. Select 'Date/Time' using the LEFT or RIGHT buttons.
3. Press the UP or DOWN buttons to navigate the menu, and press the OK
button to confirm your selected option (On, Off, Date Setup).
4. Press the MODE button to exit the settings menu.