Description Case (03) - Siemens TC3 Series User Manual

TC3x Multiplexer User's Guide
<Message Flow Case (02)>
TE
- AT+CMUX=0
<no Test Command with MS multiplexer version is triggered >
- The lowest multiplexer version is used on TE side

9.4.3 Description Case (03)

In this case the software version number on both sides is equal. It is possible to use the multiplexer
functionality without software version mismatches. The version check is passed and the internal is
equal to the used version.
<Message Flow Case (03)>
- AT+CMUX=0
- Version check
- Comparison: MSMUX_VersionX == TEMUX_VersionX
TC3x_UG_01_V03.10 - Released
enable DLC (DLCI=0..3)
UIH TestCommand
(P=0, C/R=1, TEMUX_Version)
UIH TestCommand_Resp
(P=0, C/R=0, TEMUX_Version)
TE
enable DLC (DLCI=0..3)
UIH TestCommand
(P=0, C/R=1, TEMUX_VersionX)
UIH TestCommand_Resp
(P=0, C/R=0, TEMUX_VersionX)
UIH TestCommand
(P=0, C/R=1, MSMUX_VersionX)
UIH TestCommand_Resp
(P=0, C/R=0, MSMUX_VersionX)
Page 47/50
MS
MS
10.01.2002