Resuming The Playback (Resume Play); Turning Off The Operation Beep Sound; Connecting Your Cd Player; Connecting A Stereo System - Sony CD Walkman D-F525 Operating Instructions Manual

Resuming the playback
(Resume play)
Your CD player can recall the playback point
where you stopped and resume playing from
the same place.
Set RESUME to "ON."
To cancel resume play
Set RESUME to "OFF."
Notes
• Resume play is canceled if you open the CD
player lid (even if the RESUME switch is set to
"ON").
• The playback point may result an error rate by
approximately +/– 30 seconds.
Turning off the
operation beep sound
You can turn off the beep sound that is heard
from your headphones/earphones when you
operate your CD player.
1
Remove the power source (AC
power adaptor, rechargeable
batteries or dry batteries) from the
CD player.
2
Connect the power source while
pressing x on the CD player.
To turn on the beep sound
Remove the power source and then connect
the power source without pressing x.
18
B Connecting your CD player
Connecting a stereo
system
You can listen to CDs through a stereo
system and record CDs on a cassette tape and
a MiniDisc. For details, see the instruction
manual that comes with the connected
device.
Be sure to turn off all connected devices
before making connections.
Optical
digital
connecting
cord
MiniDisc
recorder, DAT
deck, etc.
to LINE OUT
(OPTICAL)
Connecting
cord
Left (white)
Right (red)
Stereo system,
cassette recorder,
radio cassette
recorder, etc.