• Remove the emergency key as
indicated in "Keys" chapter of the
current section.
• Loosen the lateral screw that
connects the two side covers with a
torx T6 screwdriver.
• Separate the two lateral covers from
the key fob case.
• Separate both parts of the key fob
case.
• Remove the card with PCB (Printed
Circuit Board).
Before Starting
• Remove the battery from its seat and
replace with a new recommended
type of battery.
ENVIRONMENTAL!
Batteries contain dangerous materials
that could harm the environment.
Please dispose of them according to
local regulations or at the Service
Network.
3
(Continued)
67