Maserati QUATTROPORTE Owner's Manual page 265

• Before placing the chock, it is
necessary to open it like a book as
shown in the picture.
• Lift the ground coverage of the boot
compartment.
• Take the tools indicated in picture
for changing the wheel from the
container.
• Loosen and remove the spare wheel
locking knob.
• Take the tool box container and the
compact spare wheel out of the boot.
• Using the kit spanner, loosen
anticlockwise by approximately one
turn the five bolts on the wheel
to be changed. In case a "Wheel
Security Stud Bolt" is installed, it
can only be loosened and removed
by using the specific fitting spanner
insert provided with the "Wheel
Security Stud Bolt Kit", available in
the "Genuine Accessories" range. In
this case, the insert must be installed
on the kit spanner.
In an Emergency
• Place the jack near the wheel to be
changed as illustrated. Make sure
that the head of the jack is correctly
inserted in one of the slots 1 or 2
under the longitudinal member.
7
263