Maserati QUATTROPORTE Owner's Manual page 157

symbol on the button illuminates
when this function is activated.
• Adjust then the temperature you
wish to maintain by regulating the
left and/or right side temperature
control buttons. Once the desired
temperature is set, the system will
achieve and automatically maintain
that comfort level.
• When the system is set up for your
comfort level, it is not necessary
to change the settings anymore:
simply allow the system to function
automatically.
To provide you with maximum comfort
in the automatic mode, during cold
start-ups the blower speed will remain
low until the engine warms up.
Four-Zone Climate Control by the
Driver
When the car is equipped with the
additional dual-zone module in the
"Comfort" screen are present 3
soft-keys to set the "Front" climate,
the "Seats and Wheel" functions (if
equipped) and the "Rear" climate.
To set the rear climate zones touch
"Rear" soft-key or select it with
the manual controls on the central
console.
Once you have entered the rear
climate screen, by touching the
following soft-keys, the driver is able
to:
Dashboard Instruments and Controls
1 Turn on the A/C compressor.
2 The system switch the ATC
between manual and automatic
mode by controlling the interior
temperature (controls 3, 4) by
adjusting the air flow rate and the
air distribution (controls 5) of the
rear passengers.
3 Adjust the temperature in the left
rear zone in the indicated mode
for the front zones.
4 Adjust the temperature in the
right rear zone in the indicated
mode for the front zones.
5 Set the airflow distribution in
"Torso", "Bi-Level" or "Floor"
mode.
6 Synchronise the two rear
passenger temperature setting. If
the driver adjust the temperature
while SYNC mode is on, this
will affect the rear passenger
4
155