Section 2: Setting up Mitel Express Manager
For optimum performance, install the Mitel Express Manager program on your
PC's hard drive. You do not need to shut down your voice mail system while
installing Express Manager on your computer.
Installing Express Manager onto a PC
The following software must be resident on your PC to install and run Express
Manager:
•
DOS version 3.3 or higher
•
Windows 3.1 or higher.
To install the Express Manager software on your PC's hard drive:
1.
Place the disk labeled Mitel Express Manager into your 3 1/2" floppy
drive.
2.
At the DOS prompt, change to the drive in which you placed the disk.
For example,
C>a: [Enter]
3.
At the DOS prompt, run the install program.
A:\>install [Enter]
Installation of Express Manager will continue automatically until completion.
Carefully read and follow any notification about software or documentation
changes that display on your screen.
Installation is complete when the DOS prompt returns to your screen. You can now
use Express Manager to maintain your company's voice mail system.
Setting up Mitel Express Manager
15