Table of Contents
Advertisement
Bilingual Systems
To set up a system with greetings and prompts in two languages:
1.
Follow the above procedure to set up the system to operate in one
language.
2.
Log into the administrator mailbox.
3.
When prompted for a passcode, dial the Technician's passccode
(default 8642).
4.
Dial 9.
Express Messenger prompts for another Technician's function code.
5.
Dial 20272 followed by the 11-digit code required to enable the Bilingual
Voice Prompts option. You must call the Mitel Corporation order desk to
get the
code.
For more information on enabling the Bilingual Voice
Prompts language, see page 94.
Express Messenger responds with "Enabled."
6.
Set the default language (if different than the language specified in step
1) by dialing 20001 for English, 20002 for Spanish, or 20003 for
French.
7.
Set the alternate language by dialing 20011 for English, 20012 for
Spanish, or 20013 for French.
8.
Dial 10281 to reset the system.
9.
After the system resets, log into the System Administrator Mailbox
again.
10. When prompted, enter the default passcode (1234).
11. Using the Greetings menu (press 4 from the main menu) to verify
existing greetings and then record new greetings in the alternate
language, including the bilingual welcome greeting.
Introduction
14
Advertisement
Table of Contents
