Table of Contents
Advertisement
Serial ATA Port 1(~3)
Port 1(~3)
Allows you to enable or disable SATA Port.
Configuration options: [Disabled] [Enabled]
Hot Plug
Allows you to designate this port as Hot Pluggable.
Configuration options: [Disabled] [Enabled]
M.2 SATA(M-Key)
Port 4
Allows you to enable or disable SATA Port.
Configuration options: [Disabled] [Enabled]
3.3.12
Network Stack Configuration
Network Stack
This item allows user to disable or enable the UEFI Network Stack.
Configuration options: [Disabled] [Enabled]
The following items appear only when you set Network Stack to [Enabled].
IPv4 PXE Support
Allows you to enable or disable IPv4 PXE boot support. If disabled, IPv4 PXE
boot support will be unavailable. Configuration options: [Disabled] [Enabled]
IPv6 PXE Support
Allows you to enable or disable IPv6 PXE boot support. If disabled, IPv6 PXE
boot support will be unavailable. Configuration options: [Disabled] [Enabled]
PXE boot wait time
Use either +/- or numeric keys to set the value for wait time (in seconds) to
press ESC key to abort the PXE boot.
Media detect count
Use either +/- or numeric keys to set the value for number of times the
presence of media will be checked.
3.3.13
USB Configuration
Legacy USB Support
Configuration options: [Enabled] [Disabled] [Auto]
[Enabled]
[Disabled]
[Auto]
3-13
Enables Legacy USB support.
Keeps USB devices available only for EFI applications.
Allows the system to detect the presence of USB devices at
startup. If any USB device(s) is detected, the USB controller
legacy mode is enabled. If none is detected, the legacy USB
support is disabled.
Chapter 3: BIOS setup
Advertisement
Table of Contents
