Table of Contents
Advertisement
The following items appear only when you set CSM Support to [Enabled].
GateA20 Active
Configuration options: [Upon Request] [Always]
[Upon Request]
[Always]
Network
Allows you to control the execution of UEFI and Legacy Network OpROM.
Configuration options: [Do not lauch] [UEFI] [Legacy]
Storage
Allows you to control the execution of UEFI and Legacy Storage OpROM.
Configuration options: [Do not lauch] [UEFI] [Legacy]
Video
Allows you to control the execution of UEFI and Legacy Video OpROM.
Configuration options: [Do not lauch] [UEFI] [Legacy]
Other PCI devices
Allows you to determine OpROM execution policy for devices other than
Network, Storage, or Video.
Configuration options: [Do not lauch] [UEFI] [Legacy]
3.3.9
Super IO Configuration
Serial Port 1 Configuration
This item allows you to set parameters of Serial Port 1 (COMA).
Serial Port
Allows you to enable or disable the serial port (COM).
Configuration options: [Disabled] [Enabled]
COM1 Control
Allows you to select COM1 mode.
Configuration options: [RS232] [RS422] [RS485]
Serial Port 2 Configuration
This item allows you to set parameters of Serial Port 2 (COMB).
Serial Port
Allows you to enable or disable the serial port (COM).
Configuration options: [Disabled] [Enabled]
COM2 Control
Allows you to select COM2 mode.
Configuration options: [RS232] [RS422] [RS485]
Serial Port 3 Configuration
This item allows you to set parameters of Serial Port 3 (COMC).
3-9
GA20 can be disabled using BIOS services.
Do not allow disabling GA20, which functions when any
RT code is executed above 1MB.
Chapter 3: BIOS setup
Advertisement
Table of Contents
