Table of Contents
Advertisement
2.6.2
Internal connectors
1.
LCD panel monitor switch header (2-pin PANEL_SW)
This 2-pin header is for connecting a monitor switch that can turn off the LCD
panel display backlight.
2.
USB 3.2 Gen 1 connector (20-1 pin U32G1_78)
Connect a USB 3.2 Gen 1 module to this connector for additional USB 3.2
Gen 1 front or rear panel ports. This connector complies with USB 3.2 Gen
1 specifications and provides faster data transfer speeds of up to 5 Gbps,
faster charging time for USB-chargeable devices, optimized power efficiency,
and backward compatibility with USB 2.0.
Connector type
3.
USB3.2 Gen 1 port (U32G1_6)
This Universal Serial Bus (USB) port is for USB 3.2 Gen 1 devices.
2-16
PANEL_SW
PIN 1
USB3+5V
IntA_P2_SSRX-
IntA_P2_SSRX+
IntA_P2_SSTX-
IntA_P2_SSTX+
IntA_P2_D-
IntA_P2_D+
BOX HD 2x10p, K20, 2.0mm pitch
U32G1_6
GND
MON_SW#
U32G1_78
PIN 1
USB3+5V
IntA_P1_SSRX-
IntA_P1_SSRX+
GND
GND
IntA_P1_SSTX-
IntA_P1_SSTX+
GND
GND
IntA_P1_D-
IntA_P1_D+
GND
Q470EI-IM-A
Advertisement
Table of Contents
