Apm Configuration - Asus Q670EI-IM-A Manual

3.3.18 APM Configuration
This item allows you to configure APM (Advanced Power Management) settings.
ErP Ready
Allows BIOS to switch off some power at S5 to get the system ready for ErP
requirement. When set to [Enabled], all other PME options will be switched off.
Configuration options: [Disabled] [Enabled]
Restore AC Power Loss
Allows you to select AC power state when power is re-applied after a power failure.
Configuration options: [S5 State] [S0 State]
Power On By PCIE
Allows you to enable or disable the Wake-on-LAN function of the onboard LAN
controller or other installed PCIe LAN cards.
Configuration options: [Disabled] [Enabled]
Power On By PS2
Configuration options: [Disabled] [Enabled]
Power On By Ring
Configuration options: [Disabled] [Enabled]
Power On By RTC
Configuration options: [Disabled] [Enabled]
The following items appear when you set Power On By RTC to [Single event]
or [Daily event].
Wake up hour
Allows you to enter a natural number within 0-23 for hour. For example, enter
3 for 3:00 am and 15 for 3:00 pm.
Wake up minute
Allows you to enter a natural number within 0-59 for minute.
Wake up second
Allows you to enter a natural number within 0-59 for second.
The following items appear when you set Power On By RTC to [Weekly
event].
Alarm day of Week
Allows you to select the day of the week when the system is to wake up.
Configuration options: [Sunday] [Monday] [Tuesday] [Wednesday] [Thursday]
[Friday] [Saturday]
3-14
Q670EI-IM-A