Asus Q670EI-IM-A Manual page 27

7. Front Panel System Panel header (10-1 pin F_PANEL)
This header supports several chassis-mounted functions.
Connector type
• System power LED (2-pin +PWR_LED)
This 2-pin header is for the system power LED. Connect the chassis power
LED cable to this header. The system power LED lights up when you turn on
the system power, and blinks when the system is in sleep mode.
• Hard disk drive activity LED (2-pin +HDD_LED)
This 2-pin header is for the HDD Activity LED. Connect the HDD Activity LED
cable to this header. The IDE LED lights up or flashes when data is read from
or written to the HDD.
• ATX power button/soft-off button (2-pin PWR_BTN)
This 2-pin header is for the system power button.
• Reset button (2-pin RESET)
This 2-pin header is for the chassis-mounted reset button for system reboot
without turning off the system power.
Chapter 2: Motherboard information
Header 2x5p, K10, 2.54mm pitch
+PWR_LED
F_PANEL
PIN 1
+HDD_LED
PWR_BTN
RESET
2-19