V-Zug Home; Appliance Information; Factory Settings; Customer Services - V-ZUG CombiMiwell V4000 45 Operating Instructions Manual

8.7

V-ZUG Home

Mode
It is possible to choose between «Off», «Display» and «Operate and display». To connect
the appliance to «V-ZUG-Home», «Display» or «Operate and display» must be selected.
Displaying information
Displays all relevant information for the connection.
Restarting interface
The interface can be reset if difficulties are experienced establishing a connection.
Resetting
Disconnects all connections to mobile devices.
Further information on V-ZUG-Home and its availability can be found at
home.vzug.com.
8.8

Appliance information

Identification numbers
The serial number (SN) and article number are displayed.
Version numbers
The current software versions are displayed.
Demo mode
The appliance shows the current demo mode status. The demo mode can only be
switched on and off in the service menu.
Contacting Customer Services
The contact information for our Customer Services is displayed.
8.9

Factory settings

Pinned values
Resets all pinned values.
Start screen
Resets the start screen to the app view. Favourites remain unchanged.
Favourites
Entering «OK» clears all existing favourites.
V-ZUG-Home
Disconnects all connections to mobile devices.
Factory settings
Resets the settings to the factory default state. All customized data will be lost.
8.10

Customer Services

This part of the menu is intended for service staff and is password-protected.
8 User settings
37