Preheating; Application Tips - V-ZUG CombiMiwell V4000 45 Operating Instructions Manual

Table of Contents

Advertisement

– The colour of the value range changes to amber.
– The value can be reset with
▸ To turn the option on or off, touch the switch.
▸ Confirm the setting with «OK».
4.9

Preheating

If the
«Preheat» option has been turned on, do not put the food into the cooking
space until the acoustic signal is emitted and the corresponding message ap-
pears.
With Preheat, the cooking space is quickly heated up to the desired temperature.
Overview
Preheating is only possible for the following applications:
Hot air
PizzaPlus
Hot air with microwave
PizzaPlus with microwave
If the «Preheat» option is enabled, the microwave is always automatically deactiv-
ated during preheating.
Turning on preheating in the options
▸ Select the desired application (see page 16).
▸ Touch
«Options» and select
▸ Touch the «Preheat» switch.
– «Preheating» is turned on.
▸ Set further options, if required (see page 19).
▸ Confirm the setting with «OK».
▸ Press «Start» to start an application requiring preheating.
– «Preheating» starts.
– The progress of «Preheating» is shown in the CircleSlider.
Introducing food
As soon as the cooking space has preheated,
– an acoustic signal is emitted and a message is displayed. If set, the operating time
does not start to run until the message has been acknowledged.
▸ Place the food in the cooking space.
▸ Close the appliance door and confirm the message with «OK».
– The application starts.
4.10

Application tips

The application tips provide helpful suggestions that range from the use of suitable ac-
cessories or cookware to tips specific to a particular application.
If the application is not yet running:
▸ Select the desired application.
– The ready to start screen appears in the display.
.
Grill
Grill-forced convection
Grill with microwave
Grill-forced convection with microwave
«Preheat».
4 Operation
21

Advertisement

Table of Contents
loading

Table of Contents