Launch X-431 EURO TAB II User Manual
  1. Manuals
  2. Brands
  3. Launch Manuals
  4. Tablet
  5. X-431 EURO TAB II
  6. User manual

Launch X-431 EURO TAB II User Manual

Hide thumbs Also See for X-431 EURO TAB II:
Table of Contents

Advertisement

Quick Links

Download this manual
Version: V1.00.000
Revised date: April 8, 2019
Statement: LAUNCH owns the complete intellectual property rights for the software
used by this product. For any reverse engineering or cracking actions against the
software, LAUNCH will block the use of this product and reserve the right to pursue
their legal liabilities.

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the X-431 EURO TAB II and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Launch X-431 EURO TAB II

Summary of Contents for Launch X-431 EURO TAB II

  • Page 1 Statement: LAUNCH owns the complete intellectual property rights for the software used by this product. For any reverse engineering or cracking actions against the software, LAUNCH will block the use of this product and reserve the right to pursue their legal liabilities.
  • Page 2 LAUNCH is not responsible for any use of this information as applied to other units. Neither LAUNCH nor its affiliates shall be liable to the purchaser of this unit or third parties for damages, losses, costs, or expenses incurred by purchaser or...
  • Page 3 LAUNCH X-431 EURO TAB II User Manual the product, read all of the information in this section before using the product.  Never collide, throw, or puncture the tool, and avoid falling, extruding and bending it.  Do not insert foreign objects into or place heavy objects on your devic e.
  • Page 4 LAUNCH X-431 EURO TAB II User Manual  Do not drive the vehicle and operate the tool at the same time. Any distraction may cause an accident.  Keep clothing, hair, hands, tools, test equipment, etc. away from all moving or hot engine parts.

  • Page 5: Table Of Contents

    ............ 7 EATURES 1.3 T ........8 ECHNICAL PECIFICATIONS 1.3.1 Display tablet ................. 8 1.3.2 VCI device ................9 2 KNOWLEDGE OF X-431 EURO TAB II ..........10 2.1 D ..........11 ISPLAY ABLET 2.2 D ) ........13 OCKING...
  • Page 6 LAUNCH X-431 EURO TAB II User Manual Diesel Version) ................29 5 DIAGNOSIS ..................30 5.1 I ........30 NTELLIGENT IAGNOSIS 5.2 L ..........33 OCAL IAGNOSIS 5.2.1 Health Report (Quick Test) ........... 38 5.2.2 System Scan ................. 42 5.2.3 System Selection ..............43 5.3 R...
  • Page 7 LAUNCH X-431 EURO TAB II User Manual 7.3 R ........... 71 ENEW UBSCRIPTION 8 ADAS ....................73 9 USER INFO ..................75 9.1 M ..........75 EPORT 9.2 VCI ............77 9.3 A VCI ..........77 CTIVATE 9.4 F ........78...

  • Page 8: Introduction

    Featuring customized Android operating system, 2.0GHz 8-core CPU and 10.1” sunlight readable capacitive display screen with a resolution of 1920 x 1200 pixels, X-431 EURO TAB II has functions of vehicle diagnosis, oscilloscope, ignition, sensor, multimeter, browser and battery test etc.

  • Page 9: Technical Specifications

    2. WLAN connection is supported. 3. ADAS calibration: Optional. This function needs to be activated before normal use and only works with the LAUNCH-specific ADAS calibration tool. 4. Web browser: Users can make online search and visit any website. 5. File Manager: Lets you manage files or downloaded files stored in memory card efficiently.

  • Page 10: Vci Device

    LAUNCH X-431 EURO TAB II User Manual  BT 2.1 + EDR & 4.0 BLE Camera 8MP front-facing camera + 13MP rear-facing camera  Gravity Accelerometer Sensor  3-Axis Acceleration Sensor -10 ℃ ~ 50 ℃ (14 ~122 ℉ ) Operating Temp.

  • Page 11: Knowledge Of X-431 Euro Tab Ii

    X-431 EURO TAB II User Manual 2 Knowledge of X-431 EURO TAB II There are two main components to the X-431 EURO TAB II system:  Display Tablet – the central processor and monitor for the system (See Chapter “2.1”).

  • Page 12: Display Tablet

    LAUNCH X-431 EURO TAB II User Manual 2.1 Display Tablet Fig. 2-4 Top & Front Views To store the memory card for storage Memory Card Slot expansion. Type C Charging Port Reserved for charging the tablet. Power/Screen Lock To turn the tablet on/off with long press, or Button lock the screen with short press.
  • Page 13 LAUNCH X-431 EURO TAB II User Manual key to capture the current screenshot. Reserved for add-on modules (such as Data I/O Port Batterybox, Scopebox and Sensorbox), and other devices with similar port. Microphone It illuminates red while the tablet is charging.

  • Page 14: Docking Station (Optional)

    LAUNCH X-431 EURO TAB II User Manual Rear Camera Camera Flash Audio Speaker Charging Slot Flip out it to any angle and work comfortable Adjustable kickstand at your desk, or hang it on automotive part. 2.2 Docking Station (Optional) Fig. 2-6 Charging Slot -- To charge the tablet.

  • Page 15: Vci Device

    LAUNCH X-431 EURO TAB II User Manual 2.3 VCI Device Fig. 2-7 Diagnostic socket -- For connecting the diagnostic cable. LEDs -- Enables users to easily identify the working status of the VCI device. It is defined as follows (From the top to the bottom): ...

  • Page 16: Package List

    LAUNCH X-431 EURO TAB II User Manual Reset hole -- For resetting the VCI device. Data I/O port -- For connecting it to the handset via data cable (optional) to perform vehicle diagnosis. DC-IN power jack -- For connecting the power adaptor.
  • Page 17 LAUNCH X-431 EURO TAB II User Manual product registration. Optional. For connecting to Non-OBD II Non-16pin adaptor vehicle DLC. cable kit...

  • Page 18: Initial Setup

    LAUNCH X-431 EURO TAB II User Manual 3 Initial Setup 3.1 Charging The Tablet *Notes: • Only use the included power adaptor to recharge the tablet. Use of any other adaptor will damage the tool. We assume no responsibility for damage or loss resulting from using other similar adaptors other than the specified one.

  • Page 19: Adjusting Screen Brightness

    LAUNCH X-431 EURO TAB II User Manual to visit the official website. to capture the current screen and all captured screenshots are stored in the Screenshots folder. shows whether the VCI device is connected properly or not. to display a list of applications that are currently running or recently used.

  • Page 20: Network Setup

    LAUNCH X-431 EURO TAB II User Manual 3.6 Network Setup The tablet has built-in wireless communication module that can be used to get online. Once you’re online, you can register the tablet, browse the Internet, get and update apps and send email on your network.

  • Page 21: Getting Started

    LAUNCH X-431 EURO TAB II User Manual 4 Getting Started 4.1 Diagnostic Flowchart For new users, please follow the operation chart shown in Fig. 4-1 to start using this tool. Tap “Diagnose” Is VCI connector activated ? Tap “Login” to...
  • Page 22 LAUNCH X-431 EURO TAB II User Manual Fig. 4-2 (If you are a new user, follow to proceed.) (If you have registered to be a member, go to to login the system directly.) (In case you forgot password, refer to to reset a new password.)
  • Page 23 LAUNCH X-431 EURO TAB II User Manual Fig. 4-4 In Fig. 4-4, input the Serial Number and Activation Code, which can be found in the password envelope. Product SN Product SN Activation code Fig. 4-5 *Note: To exit and activate it later, tap “Skip”. In this case, you can activate your VCI by tapping “Activate VCI”...

  • Page 24: Home Screen

    LAUNCH X-431 EURO TAB II User Manual To update the diagnostic software, tap “Yes” to enter the vehicle software download screen. Tap “Update” to start downloading. To pause downloading, tap “Stop”. To resume, tap “Continue”. When download is complete, the system will install the software package automatically.
  • Page 25 LAUNCH X-431 EURO TAB II User Manual Name Description This module allows you to obtain vehicle data from the cloud server to perform quick test via reading VIN, Intelligent which provides a perfect solution to various defects Diagnose resulting from step-by-step menu selection. In addition, user can also check the historical repair records online through this module.

  • Page 26: Vehicle Menu Layout

    LAUNCH X-431 EURO TAB II User Manual login etc. To check the vehicle models supported on the X-431 Vehicle Coverage EURO TAB II. Tablet Setting Configures the system setting of the tablet. Includes TeamViewer, Email, Browser, and product Other Modules manual etc.

  • Page 27: Diagnostics Toolbar

    LAUNCH X-431 EURO TAB II User Manual All Tab: Displays all the vehicle makes in the vehicle menu. Common Tab: Displays all frequently-used vehicle makes. Regional buttons: Tap different buttons to switch to corresponding vehicles. If you have purchased a Gasoline & Diesel Version, a Heavy-duty tab will appear next to the regional button.

  • Page 28: Connections

    LAUNCH X-431 EURO TAB II User Manual  To obtain stable communication, you are strongly recommended to perform the vehicle diagnosis via data cable. In this case, the data cable is required to connect the VCI device and the tablet.
  • Page 29 LAUNCH X-431 EURO TAB II User Manual  A vehicle not equipped with an OBD II management system supplies communication through a DLC connection, and in some cases supplies 12V power through the cigarette lighter receptacle or a connection to the vehicle battery.

  • Page 30: Vehicle Connection

    LAUNCH X-431 EURO TAB II User Manual vehicle’s battery, and the other end to the power jack of OBD I adaptor. Fig. 4-12 4.4.3 Vehicle connection (For Commercial Vehicle/ Gasoline & Diesel Version) The method used to connect the VCI device to a vehicle’s DLC depends on the vehicle’s configuration as follows:...

  • Page 31: Diagnosis

    LAUNCH X-431 EURO TAB II User Manual 5 Diagnosis 5.1 Intelligent Diagnosis Through simple wireless communication between the tablet and VCI device, you can easily get the VIN (Vehicle Identification Number) information of the currently identified vehicle. Once the VIN is successfully identified, the system will retrieve it from the remote server and then guide you to vehicle information page without performing the step-by-step manual menu selection.
  • Page 32 LAUNCH X-431 EURO TAB II User Manual A. If the VIN can be found from the remote server database, a screen similar to Fig. 5-2 displays: Fig. 5-2 • Tap “Diagnostic” to start a new diagnostic session. • Tap “Maintenance record” to view its historical repair record. If there are records available, it will be listed on the screen in sequence of date.
  • Page 33 LAUNCH X-431 EURO TAB II User Manual B. If the handset failed to access the VIN information, the screen will display as below: Fig. 5-4 In this mode, you need to input the VIN manually or tap to scan it.

  • Page 34: Local Diagnosis

    LAUNCH X-431 EURO TAB II User Manual • If you have scanned the VIN of the vehicle, tap to choose it from the record list. • In case the handset failed to detect it, tap to enter it manually. • To turn the flash on, tap After scanning, the screen automatically displays the result.
  • Page 35 LAUNCH X-431 EURO TAB II User Manual Fig. 5-7 2 approaches are provided for you to access the vehicle diagnostic software. Choose either one of the following ways: A) VIN Scan VINSCAN enables you to access it more quickly. In this case, automatic scan (Camera Scan) and manual input (INPUT VIN) are available.
  • Page 36 LAUNCH X-431 EURO TAB II User Manual Fig. 5-9 Place the VIN inside the viewfinder rectangle to scan it. The most recognizable location for this number is in the top left corner on the vehicle’s dashboard. Other locations include the driver’s door or post, and the firewall under the hood.
  • Page 37 LAUNCH X-431 EURO TAB II User Manual Fig. 5-10  If the VIN scanned is incorrect, tap the result field to modify it and then tap “OK”. If the VIN exists on the remote server, the system will enter the vehicle information screen.
  • Page 38 LAUNCH X-431 EURO TAB II User Manual instruction to access the diagnostic software. Take Demo as an example to demonstrate how to diagnose a vehicle. 1). Select diagnostic software version: Tap the “DEMO” to go to Step 2. (*Note: If more than one version is available on this handset, it will be listed on the screen.)

  • Page 39: Health Report (Quick Test)

    LAUNCH X-431 EURO TAB II User Manual Fig. 5-13 5.2.1 Health Report (Quick Test) This function varies from vehicle to vehicle. It enables you to quickly access all the electronic control units of the vehicle and generate a detailed report about vehicle health.
  • Page 40 LAUNCH X-431 EURO TAB II User Manual system with OK displays in white (normally). *Note: Diagnostic Trouble Codes or Fault Codes can be used to identify which engine systems or components that are malfunctioning. Never replace a part based only on the DTC definition.
  • Page 41 LAUNCH X-431 EURO TAB II User Manual Fig. 5-16 to select the report type from the option list and input the required information, and then tap “OK”. *Note: To facilitate the comparison of the pre-repair and post-repair reports and get accurate test result, please make sure you saved the right type of the diagnostic report.
  • Page 42 LAUNCH X-431 EURO TAB II User Manual Fig. 5-17 Enter the shop name, address line, technician (tap “Add” to create a pull-down list) and customer name and then tap “OK” to confirm and navigate to the report details page. *Note: Alternatively you can also set the workshop information in “User Info” ->...

  • Page 43: System Scan

    LAUNCH X-431 EURO TAB II User Manual Fig. 5-18 Clear DTCs: Tap to clear the existing diagnostic trouble codes. *Note: Clearing DTCs does not fix the problem(s) that caused the code(s) to be set. If proper repairs to correct the problem that caused the code(s) to be set are not made, the code(s) will appear again and the check engine light will illuminate as soon as the problem that cause the DTC to set manifests itself.

  • Page 44: System Selection

    LAUNCH X-431 EURO TAB II User Manual Fig. 5-19 Tap the desired system to advance to the test function selection page. For detailed operations on test function, please refer to Chapter 5.2.3. 5.2.3 System Selection This option allows you manually select the test system and function step by step.
  • Page 45 LAUNCH X-431 EURO TAB II User Manual page. Fig. 5-21 *Note: Different vehicle has different diagnostic menus. A. Version Information This function is used to read the version information of system mode, vehicle VIN, software and ECU. In Fig. 5-21, tap “Version Information”, the screen displays the ECU information.
  • Page 46 LAUNCH X-431 EURO TAB II User Manual Fig. 5-22 On-screen Buttons: Freeze Frame: When an emission-related fault occurs, certain vehicle conditions are recorded by the on-board computer. This information is referred to as freeze frame data. Freeze frame data includes a snapshot of critical parameter values at the time the DTC is set.
  • Page 47 LAUNCH X-431 EURO TAB II User Manual In Fig. 5-21, tap “Clear Fault Code”, a confirmation dialog box pops up on the screen. Tap “Yes”, the system will automatically delete the currently existing trouble code. *Note: After clearing, you should retrieve trouble codes once more or turn ignition on and retrieve codes again.
  • Page 48 LAUNCH X-431 EURO TAB II User Manual stream item, just check the box before the item name. Unselect: Tap it to deselect all data stream items. OK: Tap it to confirm and jump to the next step. After selecting the desired items, tap “Confirm” to enter the data stream reading page.
  • Page 49 LAUNCH X-431 EURO TAB II User Manual Fig. 5-25 • Min/Max: Tap to define the maximum/minimum value. Once the value goes beyond the specified value, the system will alarm. *Note: The real time (Live Data) vehicle operating information (values/status) that the on-board computer supplies to the tool for each sensor, actuator, switch, etc.
  • Page 50 LAUNCH X-431 EURO TAB II User Manual comparison. • Value: Tap to display the parameters in texts. • Customize: Tap , a pull-down list of the data stream items appears on the screen. Select (Maximum 4 data stream items can be selected) /deselect the desired items and then screen will display/remove the waveforms corresponding to these items immediately.
  • Page 51 LAUNCH X-431 EURO TAB II User Manual Fig. 5-28 Report: To save the current data as a diagnostic report. All diagnostic reports can be accessed from “User Info” -> “My Reports” -> “Diagnostic Report”. Record: Tap to start recording diagnostic data. Recorded live data can serve as valuable information to help you in troubleshooting of vehicle problems.
  • Page 52 LAUNCH X-431 EURO TAB II User Manual Fig. 5-29 Once recording is complete, tap to stop it and navigate to the data revision screen. Fig. 5-30 Tap the Min./Max. value to change it. After modifying all desired items, tap “Save” to save it as a sample DS file. All DS files are stored under the “Data Stream Sample”...

  • Page 53: Remote Diagnosis

    Each time when an operation is successfully executed, “Completed” displays. 5.3 Remote Diagnosis This option aims to help repair shops or technicians launch instant messaging and remote diagnosis, making the repair job getting fixed faster. Tap “Remote Diagnosis” on the Home screen, the screen appears blank by default.

  • Page 54: Add Friends

    In the search bar, input the partner’s username and tap “Search” button next to the search bar to starts searching from Launch’s golo business database. The partner must be the users who have registered their Launch’s diagnostic tools. They may be the following: ...
  • Page 55 LAUNCH X-431 EURO TAB II User Manual Fig. 5-32 Tap the user avatar, the following screen displays. Fig. 5-33 Tap “Add friend” to send your request. Once the partner receives the request, a beep will sound. Tap the “Message” tab: •...

  • Page 56: Start Instant Messaging

    5.3.3 Start instant messaging *Note: The I/M (Instant Messaging) function is open to all users who had Launch’s diagnostic tool equipped with this module. After adding your friends, tap the desired one’s photo to enter a screen similar to the following: Fig.

  • Page 57: Launch Remote Diagnosis (Device-To-Device)

    5.3.4 Launch remote diagnosis (Device-To-Device) The tablet is allowed to launch remote diagnosis with other diagnostic tools (including but not limited to the X-431 EURO TAB II) of Launch family, which are equipped with this module. * Note: Before performing this operation, please make sure the following no matter which side sends the remote request: ...
  • Page 58 LAUNCH X-431 EURO TAB II User Manual manual diagnosis.  In process of remote diagnosis, tap the button to send a voice message.  Once vehicle diagnosis is complete, a report will be created. Input your comments on this report, and then tap “Send Report”...
  • Page 59 LAUNCH X-431 EURO TAB II User Manual Tap “Invite remote diagnostic assistant” Choose the desired diagnostic software Wait for partner’s confirmation Start connecting after request confirmed Start Diagnosis Generate diagnostic report Cancel To cancel this operation.

  • Page 60: Launch Remote Diagnosis (Device-To-Pc)

    X-431 EURO TAB II User Manual 5.3.5 Launch remote diagnosis (Device-To-PC) Except that the remote diagnosis can be done between different Launch’s diagnostic tools that come loaded with the module, user also can ask for remote control from PC client technician.
  • Page 61 LAUNCH X-431 EURO TAB II User Manual Fig. 5-38 1. Slide the switch “Allow device to be connected to the WEB client remote diagnostic device” to ON so that the partner can find and access to this device while using the PC.

  • Page 62: How To View Diagnostic History

    LAUNCH X-431 EURO TAB II User Manual 3. Tell the partner to input his own official technician account and password, and then tap “Login” to navigate to the following figure. Fig. 5-40 4. Tell the partner to check the box “Serial number” and enter the Serial Number provided by you, and then tap “Start remote diagnosis”.

  • Page 63: How To Feedback Diagnostic Logs

    LAUNCH X-431 EURO TAB II User Manual details of diagnostic process. The History function provides a quick access to the tested vehicles and users can resume from the last operation, without starting from scratch. Tap “History”, all diagnostic records will be listed on the screen in date sequence.
  • Page 64 LAUNCH X-431 EURO TAB II User Manual 2) Choose the failure type and fill in the detailed failure description in the blank text box and telephone or email address. After inputting, tap “Submit Result” to send it to us. B. History Tap it to view all diagnostic feedback records.

  • Page 65: Special (Reset) Function (Only For Passenger Vehicle/Gasoline & Diesel Version)

    LAUNCH X-431 EURO TAB II User Manual 6 Special (Reset) Function (Only for Passenger Vehicle/Gasoline & Diesel Version) In addition to amazing & powerful diagnostic function, the tablet also features various service functions. The most commonly performed service functions contain: ...

  • Page 66: Oil Reset Service

    LAUNCH X-431 EURO TAB II User Manual Follow the instructions on the screen to operate Select the service mode Select “Reset” (The available mode varies from vehicle to vehicle) Select the desired reset item (e.g. oil lamp reset Select the car brand etc.)

  • Page 67: Steering Angle Calibration

    LAUNCH X-431 EURO TAB II User Manual 6.3 Steering Angle Calibration To reset the steering angle, first find the relative zero point position for the car to drive in straight line. Taking this position as reference, the ECU can calculate the accurate angle for left and right steering.

  • Page 68: Immo Service

    LAUNCH X-431 EURO TAB II User Manual learning for the car. After tooth learning is successful, the MIL turns off. After the engine ECU, crankshaft position sensor, or crankshaft flywheel is replaced, or the DTC 'tooth not learned' is present, tooth learning must be performed.

  • Page 69: Maintenance System Reset

    LAUNCH X-431 EURO TAB II User Manual 6.9 Battery Maintenance System Reset This function enables you to perform a resetting operation on the monitoring unit of vehicle battery, in which the original low battery fault information will b e cleared and battery matching will be done.

  • Page 70: Gearbox Matching

    LAUNCH X-431 EURO TAB II User Manual 6.12 Gearbox Matching 1. This function can complete the gearbox self-learning to improve gear shifting quality. 2. When the gearbox is disassembled or repaired (after some of the car battery is powered off), it will lead to shift delay or impact problem. In this case, this...

  • Page 71: Software Update

    LAUNCH X-431 EURO TAB II User Manual 7 Software Update This module allows you to update the diagnostic software & App and set frequently used software. If you did not download the software in process of product registration or a...

  • Page 72: Renew Subscription

    LAUNCH X-431 EURO TAB II User Manual the “Common Software” option to create a frequently used software list. Fig. 7-2 Tap “Common software” tap “+”, a pop-up window appears. Select the checkbox before the software name and tap “SAVE”, the software will be displayed in the Common software list.
  • Page 73 LAUNCH X-431 EURO TAB II User Manual B. Using Subscription Renewal Card 1. Tap “Renewal” to navigate to the renewal type selection screen. 2. Select “Subscription Renewal Card”. 3. Input the 24-digit password of Subscription Renewal Card and then “Submit” to finish the renewal.

  • Page 74: Adas

    To ensure normal use of the calibration function of the diagnostic software, you need to activate the pin card to unlock the calibration function on the X-431 EURO TAB II tablet first. Follow the steps below to activate it.
  • Page 75 LAUNCH X-431 EURO TAB II User Manual Fig. 8-2 3. Scratch or scrap the designated area on the included Activation Card to reveal the password, and input the 24-digit password to activate it. 4. Now the ADAS function becomes accessible and is ready for use.

  • Page 76: User Info

    LAUNCH X-431 EURO TAB II User Manual 9 User Info This function allows users to manage personal information and VCI device. 9.1 My Report This option is used to view, delete or share the saved reports. Tap “My Report”, there are total 3 options available.
  • Page 77 LAUNCH X-431 EURO TAB II User Manual Fig. 14-2 Tap the desired one to enter: Fig. 14-3 Select the desired data stream items and tap “Confirm” to jump to the playback page:...

  • Page 78: Vci

    LAUNCH X-431 EURO TAB II User Manual Fig. 14-4 On-screen Buttons: Graph – displays the parameters in waveform graphs. Value – this is the default mode which displays the parameters in texts and shows in list format. Combine – this option is mostly used in graph merge status for data comparison.

  • Page 79: Fix Connector Firmware/System

    LAUNCH X-431 EURO TAB II User Manual Fig. 14-5 Input the Serial Number and Activation Code, and then tap “Activate” to activate For details on how to obtain Activation Code, tap the link below to get help. 9.4 Fix Connector Firmware/System Use this item to upgrade and fix diagnostic firmware.

  • Page 80: Subscription Renewal Card

    LAUNCH X-431 EURO TAB II User Manual 9.9 Subscription Renewal Card This item is used to check the status of the subscription renewal card. Fig. 14-6 1. Input the 12-digit subscription renewal card number. 2. Tap “Search” to get the search result.

  • Page 81: Units

    LAUNCH X-431 EURO TAB II User Manual 9.12.1 Units It is designed to configure the measurement unit. Metric System and English System are available. 9.12.2 Shop Information This option lets you define your print information. It mainly includes Workshop, Address, Telephone, Fax and License Plate.

  • Page 82: Clear Cache

    LAUNCH X-431 EURO TAB II User Manual at + reboot = 1 rebooting... 1. Tap “Reset” to configure the printer. Step 1: Connect the printer: Tap “Scan” to start scanning and select the desired printer hotspot named with X-431PRINTER-XXXX (XXXX stands for 4 characters), and then tap “Connect”...

  • Page 83: Login/Exit From Current Account

    LAUNCH X-431 EURO TAB II User Manual 9.12.7 Login/Exit from current account To logout the current user ID, tap “Log out”. To login the system again, tap “Login”. 9.13 Diagnostic Software Clear This item allows you to hide/clear the diagnostic software that is not frequently used.

  • Page 84: Other Modules

    10.2 Browser 10.2.1 Open browser On the Home screen, tap Browser to launch the browser. You can choose the desired homepage or input the website address to browse. Fig. 15-1 Return to the previous page.

  • Page 85: Download Files

    LAUNCH X-431 EURO TAB II User Manual Create a new tab. Input a web address. Add the current page as bookmark. Open search bar. Open bookmark list. View more options. 10.2.2 Download files Files, pictures, and applications can be downloaded from the website in browser.

  • Page 86: Teamviewer

    LAUNCH X-431 EURO TAB II User Manual Fig. 15-2 2. Your partner must install the TeamViewer full version program (if not installed, go to http://www.teamviewer.com to download it), and then start the software on his/her computer at the same time, in order to provide support and take control of your tablet remotely.

  • Page 87: System Ota Upgrade

    LAUNCH X-431 EURO TAB II User Manual Fig. 15-3 2. Your partner must install the TeamViewer QuickSupport program (if not installed, go to http://www.teamviewer.com to download it), and then start the software on his/her computer/mobile device at the same time, in order to control the partner's computer/mobile device remotely.

  • Page 88: File Explorer

    LAUNCH X-431 EURO TAB II User Manual 10.5 File Explorer ES File Explorer is a file and application manager. You can access and create folders on the tablet without needing to connect it to a computer. The app also features an application manager, task killer and download manager.

  • Page 89: Faq

    LAUNCH X-431 EURO TAB II User Manual 11 FAQ 1. Communication error with vehicle ECU? Please confirm: 1. Whether the VCI is properly connected. 2. Whether the vehicle ignition switch is ON. 3. If all checks are normal, send vehicle year, make, model and VIN number to us using Feedback feature.
  • Page 90 LAUNCH X-431 EURO TAB II User Manual There are 2 methods available to reset the tablet: Method 1 1. Ensure the tablet is in ON mode. 2. Select “Tablet Setting” on the Home screen. 3. Select “Backup & reset”. 4. Tap “Factory data reset”.
  • Page 91 LAUNCH X-431 EURO TAB II User Manual vehicle, just switch to the corresponding VCI device. 7. How to update Android? A newer Android version will be released to bring better user experience and more capabilities. Please check for updates on regular basis.
  • Page 92 The exclusive remedy for any automotive meter found to be defective is repair or replacement, and LAUNCH shall not be liable for any consequential or incidental damages.
  • Page 93 X-431 EURO TAB II User Manual Statement: LAUNCH reserves the rights to make any change to product designs and specifications without notice. The actual object may differ a little from the descriptions in the manual in physical appearance, color and configuration. We...

Table of Contents