Clear Cache; About; Diagnostic Software Auto Update - Launch X-431 EURO TAB II User Manual

Hide thumbs Also See for X-431 EURO TAB II:

Table of Contents

LAUNCH

at + reboot = 1

rebooting...

1. Tap "Reset" to configure the printer.

Step 1: Connect the printer:

Tap "Scan" to start scanning and select the desired printer hotspot named

with X-431PRINTER-XXXX (XXXX stands for 4 characters), and then tap

"Connect" to enter Step 2.

Step 2: Join the printer into LAN:

Tap "Scan" to select the desired local wireless network from the list, and type

in the security password (If it is an open network, password is not required),

and then tap "Confirm".

4. Once the network of the printer is connected and the printer is found, tap

"Printing test" to test the printing.

Now you can use the printer to print!

If the printer is not found, please reset the printer to default factory settings (refer

to Step 2 for details) and check whether the current device and the printer are on

the same LAN.

B. If you have configured the printer to the LAN:

2. Tap "Connect to Printer":

a). If the local network remains as it is, tap "Test Print" directly to test the

printing.

b). If the local network changes, you have to reset the printer.

9.12.4 Clear Cache

This item is used to clear the App cache.

Tap "Clear Cache", a pop-up window will appear on the screen. Tap "OK" to

clear cache and the system will restart the App.

The software version information and disclaimer are included.

This option is used to set to turn the automatic diagnostic s oftware update

function ON/OFF.

X-431 EURO TAB II User Manual

Table of Contents