Bush DVD-225BHS Instruction Manual page 25

Using your DVD PLAYER
Let's get started
Audio out: Use this to select the audio coding used to listen to your DVD on your TV.
SPDIF / OFF: Turns off the SPDIF output.
SPDIF / RAW: If you have connected your DIGITAL AUDIO OUT to a multi-channel
decoder/receiver.
SPDIF / PCM: Only if your receiver is not capable of decoding multi-channel audio.
HDMI Audio: Use this to select the HDMI Audio coding used to listen to your DVD on your
TV.
Choose between: AUTO or PCM.
Picture
Select the Preference menu using the t
Brightness: Use this to set the brightness of the DVD's image.
Press the ▼ button to select brightness on the sub menu. Use the
slider. To increase the brightness press the ▲ button, or the ▼ button to decrease the
brightness.
When you have finished adjusting the setting, press the
menu.
Contrast: Use this to set the contrast of the DVD's image.
Press the ▼ button to select contrast on the sub menu. Use the
To increase the contrast press the ▲ button, or the ▼ button to decrease the contrast.
When you have finished adjusting the setting, press the
menu.
Hue: Use this to set the hue of the DVD's image.
Press the ▼ button to select hue on the sub menu. Use the
increase the hue press the ▲ button, or the ▼ button to decrease the hue
When you have finished adjusting the setting, press the
menu.
Saturation: Use this to set the saturation of the DVD's image.
Press the ▼ button to select saturation on the sub menu. Use the
slider. To increase the saturation press the ▲ button, or the ▼ button to decrease the
saturation.
When you have finished adjusting the setting press the button to go back to the sub menu.
section of these instructions Or by calling one of our experts on 0345 604 0105
buttons on the remote control.

BRIGHTNESS
CONTRAST
HUE
SATURATION
SHARPNESS

button access the
button to go back to the sub


button access the slider.
button to go back to the sub


button access the slider. To

button to go back to the sub
 button access the

25