Note: This DVD Player has been designed to go to Standby mode automatically after
approximately 20 minutes of inactivity. Please press the
Power button on the
product or the
Power button on the remote control, to turn the DVD Player back on
again.
1. Press the
Power button on the DVD Player or the
Power button on the remote
control to Power on the product. The LED on the front right of your DVD Player will
change to green.
2. Press the
Power button on the DVD Player or the
Power button on the remote
control to go to Standby mode. The LED on the front right of your DVD Player will
change to red.
If you require any technical guidance or find that your product is not operating as intended, a simple solution can often be found in the Troubleshooting