Installing The Remote Batteries; Remote Control Working Range; Connecting The Mains Power - Bush DVD-225BHS Instruction Manual

Getting to know your DVD player
You'll be up and running in no time

Installing the remote batteries

1. Press down the tab on the remote control battery
door, in the direction of the arrow, to remove it.
2. Insert the 2 x AAA batteries supplied, taking care
to the + and - markings and position the batteries
the correct way around.
3. Replace the battery cover, making sure that it
'clicks' shut.

Remote control working range

The remote signal may not be received if there is an obstacle between the remote
control and the remote sensor on your DVD Player.
Note: Direct sunlight or other bright light sources shining on the remote sensor may
affect the performance of the remote control.

Connecting the mains power

1. Connect the mains power lead into the socket on the back of
the DVD Player.
2. Plug the power adapter into the mains power wall socket
and switch on.
Note: Do not connect the mains power until ALL other
connections have been made.
3. The Red LED on the front right of your DVD Player will turn
on and your DVD Player will now be in Standby mode.
section of these instructions Or by calling one of our experts on 0345 604 0105
16 Feet (5M)
USB
19