Using your DVD PLAYER
Let's get started
Default: Use this to reset the all of the DVD players setting to the factory standard.
Use the ▼ button to select Default then the
button.
Language
Select the Audio menu using the
OSD Language: Use this to select your preferred language you wish the DVD players
menus to be display in.
Audio Lang: Use this to select the preferred language you want to listen to the DVD in.
Important: The DVD must support the language selected for this preference to work.
Subtitle Lang: Use this to select the preferred language you want to view the subtitles on
the DVD in.
Important: The DVD must support the language selected for this preference to work.
Menu Lang: Use this to select your preferred language you wish the DVDmenus to be
display in.
Important: The DVD must support the language selected for this preference to work.
Power Resume: If Power Resume is turned on whilst watching a DVD and you press the
■ button, play will resume at the point you reached when you press the
Select between On or Off.
Auto Standby: Choose from OFF / 3 hours / 4 hours.
Audio
Select the Preference menu using the
If you require any technical guidance or find that your product is not operating as intended, a simple solution can often be found in the Troubleshooting
24
buttons on the remote control..
OSD LANGUAGE
AUDIO LANG
SUBTITLE LANG
MENU LANG
POWER RESUME
AUTO STANDBY
buttons on the remote control.
AUDIO OUT
HDMI AUDIO
button to select Restore. Press the ENTER
SPDIF/OFF
SPDIF/RAM
SPDIF/PCM
button.
II