Operating Your Scooter - Gio Electric TITAN Owner's Manual

Operating your Scooter

Turning your Scooter ON/OFF
To turn the scooter on, insert the key and turn clockwise. To turn your
scooter off, turn the key counterclockwise from the on position. The LCD
display should activate indicating the scooter is on. Your scooter can also
be turned on & off remotely with the included key fob, see further
instructions on pg 12. Once the scooter is turned on using a specific
method (keys or fob) it can ONLY be turned off with the same method.
Driving your Scooter
The Titan features a variable twist throttle on the right handlebar. (See
steering controls diagram) Gently twist the throttle grip inwards to slowly
accelerate to the desired speed. Avoid twisting too hard or too quickly as
this may result in jumps in accelerations making steering less
controllable.
To slow or stop your scooter, release the throttle and squeeze both brake
levels to apply both front and rear brakes. Always apply both brakes at
the same time, especially when traveling at higher speeds. Please note
the electric braking function of your scooter will prevent the motor from
starting if the brakes are applied.
Drive with care on wet/slippery/icy surfaces as it will increase the distance
needed to stop, allow extra room for braking in these conditions. When
driving downhill it is recommended to release the throttle and apply
brakes as needed to control the scooter's speed.
10