Operating & Adjusting Your Scooter - Gio Electric Tron Owner's Manual

Operating & Adjusting your Scooter
Turning your Scooter ON/OFF
To turn the scooter on, insert the key into the ignition and turn clockwise. To
turn your scooter off, turn the key counterclockwise from the on position.
The LCD display should activate indicating the scooter is on.
Driving your Scooter
The Tron features a variable twist throttle on the right handlebar. Gently
twist the throttle grip inwards to slowly accelerate to the desired speed.
Avoid twisting too hard or too quickly as this may result in jumps in
accelerations making steering less controllable.
To slow or stop your scooter, release the throttle and squeeze both brake
levels to apply both front and rear brakes. Always apply both brakes at the
same time, especially when traveling at higher speeds. Please note the
electric braking function of your scooter will prevent the motor from starting
if the brakes are applied.
⚠ Drive with care on wet/slippery/icy surfaces as it will increase the
distance needed to stop, allow extra room for braking in these
conditions. When driving downhill it is recommended to release the
throttle & apply brakes as needed to control the scooter's speed. ⚠
Your scooter features control switches next to the throttle grip that adjust
driving features. The upper switch labeled 1-3 sets the current speed setting
of the scooter. (Setting approximate speed: 1 - 3.75mph(6km/h), 2 -
7.5mph(12km/h) 3 - 15mph(25km/hr)) The lower switch drives the scooter in
reverse at 5mph(8km/h). Bring your scooter to a complete stop before
switching between forward and reverse.
12