Gio Electric TITAN Owner's Manual page 11

Your scooter features control switches next to the throttle grip that adjust
driving features. The upper switch labeled 1-3 sets the current speed
setting of the scooter. (Setting approximate speed: 1 -5mph(9km/h), 2 -
10mph(15km/h) 3 - 20mph(32km/hr)) The lower green switch drives the
scooter in reverse at 3mph(5km/h). Bring your scooter to a complete
stop before switching between forward and reverse.
The brake lever also features a parking brake option. Once stopped you
can apply the parking brake by squeezing the brake normally and then
pressing in the parking brake button. To release the parking brake simply
squeeze the brake lever again. Always attempt to park on a level surface
if possible.
Using the electric features of you Scooter
Your scooter has several features that have controls also located on
either side of the display screen. (See control diagram for locations)
Right Side Controls:
The uppermost switch labeled with ⟁ toggles the blinking "hazard lights"
of your scooter on and off.
The center sliding switch controls the scooters lights:
( ☼ ) All lights including headlight ON
(>DⱭ<) Daytime signal & running lights only or
( ○ ) All lights OFF
The lowermost of the switches is a button labeled with a horn symbol that
activates the scooter's horn.
11