Input Settings Main Menu - Casio XJ-S43W User Manual

Input Settings Main Menu

Setting
Input
Name
COMPUTER RCUVN
Terminal
Video Signal RCVUN
Signal Name RCVHDN
Indicator
Restore RCVHDN
Menu
Defaults
Setting
Unit
Single Use this sub-menu to specify manually the type of signal
being input from the projector's COMPUTER terminal.
Auto*:
Automatically detects the signal being input from the
COMPUTER terminal and configures the appropriate input
protocol.
RGB:
Select this option when a computer is connected to the
COMPUTER terminal. For details about connecting a
computer, see "Connecting a Computer to the Projector"
in the "User's Guide (Basic Operation)".
Component:
Select this setting when the projector's COMPUTER
terminal is connected to the component video output
terminal of a video device using an optionally available
YK-3 component video cable. For information about
connection, see "Connecting to a Component Video
Output Device" on page 45.
Single Use this sub-menu to specify manually the type of signal
being input from the projector's AV terminal.
Auto*:
Select this setting to have the projector switch the video
signal system automatically in accordance with the input
signal from the video device that is connected to the AV
terminal.
NTSC / NTSC4.43 / PAL / PAL-M / PAL-N / PAL60 /
SECAM:
Each setting selects the applicable video system. Use
these settings when you want to specify only one specific
video signal for the AV terminal.
Single Use this sub-menu to specify whether or not the name of
the currently selected signal source should be displayed in
the projected image.
On*:
Select this option to turn on display of the name of the
currently selected signal source in the projected image.
Off:
Select this option to turn off display of the signal source
name.
Source Use this sub-menu to return all of the sub-menu items on
Specific the Input Settings main menu to their initial default
settings.
Restoring menu defaults will restore defaults for the
currently selected input source. Note that the "Signal
Name Indicator" setting is always returned to its initial
default, regardless of the currently selected input
source.
Restoring menu defaults when there is no input signal
will restore defaults for the currently selected input
source.
29
Description