Image Adjustment 2 Main Menu - Casio XJ-S43W User Manual

Setting
Input
Name
Noise Filter RCV
Restore RCVHD
Menu
Defaults

Image Adjustment 2 Main Menu

Setting
Input
Name
Vertical RCV
Position
Horizontal RCV
Position
Frequency R
Phase R
Restore RCV
Menu
Defaults
Setting
Unit
Source This setting is valid when VIDEO is selected as the input
Specific source.
Normal*:
Select this setting when projecting a movie.
High:
Select this setting when projecting still images.
In particular, this setting should be used when projecting
still images from a digital camera connected to the
projector's VIDEO terminal.
Source Use this sub-menu to return all of the sub-menu items on
Specific the Image Adjustment 1 main menu to their initial default
settings.
Restoring menu defaults will restore defaults for the
currently selected input source.
Setting
Unit
Signal Use this sub-menu to adjust the vertical position of the
Specific input source image within the projection area.
Signal Use this sub-menu to adjust the horizontal position of the
Specific input source image within the projection area.
Signal When vertical bands appear in the projected image while
Specific RGB is selected as the input source, it means that the
frequency setting is not correct. When this happens, use
this setting to adjust the frequency manually.
Important!
If, for some reason, your manual frequency settings
cause the image input from the computer to
disappear from the projection, you can press the
[AUTO] key to perform an auto adjust operation,
which should cause the image to appear.
Signal When there is flickering in the projected image while RGB
Specific is selected as the input source, it means that the phase
setting is not correct. When this happens, use this setting
to adjust the phase manually.
Source Use this sub-menu to return all of the sub-menu items on
Specific the Image Adjustment 2 main menu to their initial default
settings.
Restoring menu defaults will restore defaults for the
currently selected input source.
"Image Adjustment 2" main menu "Vertical Position",
"Horizontal Position", "Frequency", and "Phase" defaults
can be restored for the current signal type (XGA/60Hz,
SXGA/60Hz,etc.) only.
25
Description
Description