Troubleshooting - Sony Cyber-shot DSC-P7 Operating Instructions Manual

Troubleshooting

If you have trouble with your camera, try
the following solutions.
1 Check the items on pages 79 to 85. If the
screen shows "C:ss:ss", the
self-diagnostics function is
working. Please see page 87.
Battery and power
Symptom
The battery pack is not
charged.
The battery pack cannot
be installed.
/CHG lamp flashes.
While charging the battery
pack, the /CHG lamp
does not light.
The battery remaining
indicator is incorrect. Or
the sufficient battery
remaining indicator is
displayed but the power
soon runs out.
2 Press RESET (page 9) located inside the
battery/"Memory Stick" cover, then turn
on the power again. (This will erase the
date/time settings, etc.)
Cause
• The camera is turned on.
• The battery pack is not properly installed.
• The battery pack is not properly installed.
• The battery pack malfunctions.
• The AC power adaptor is not connected.
• The battery pack is not properly installed.
• The charging is complete.
• You have used the camera for a long time in an
extremely hot or an extremely cold location.
• The battery pack is dead (page 97).
• The battery pack is discharged.
• A mismatch has occurred in the remaining
battery time information.
3 Consult your Sony dealer or local
authorized Sony service facility.
RESET
Solution
p Turn the power off (page 15).
p Install the battery pack while pushing the battery eject lever
down using the front edge of the battery pack (page 10).
p Properly install the battery pack (page 10).
p Consult your Sony dealer or local authorized Sony service
facility.
p Properly connect the AC power adaptor (page 10).
p Properly install the battery pack (page 10).
—
—
p Replace the battery pack with a new one.
p Replace it with a charged battery pack (page 10).
p Fully charge the battery pack (page 10).
Troubleshooting
79